Creo Simulate > Reference Links > Surfaces and Curves Used in Shell Definition
Surfaces and Curves Used in Shell Definition
You can use the following surfaces and curves to define a shell:
Mode
Surfaces/Curves You Can Select
Native mode
You can select individual surfaces, part boundaries or surface sets as references.
Surface references are valid only for 3D model types and 2D plane stress model types.
Curve references are valid only for 2D plane strain and 2D axisymmetric model types.
FEM mode
You can select the individual surfaces of shell pairs, part boundaries, or surface sets as references.
When you choose a shell pair, Creo Simulate respects any shell properties, such as thickness or material, provided you assign the properties to the red surface of the pair. If you choose the yellow surface of the compressed pair, Creo Simulate ignores the shell properties and derives such properties from the geometry of the solid.
Refer to the Fundamentals Help for more information on surface sets.
Return to Shell Definition.
這是否有幫助?