Creo Simulate > Creating Analyses > Vibration Analysis > To Use Previous Analysis Results in a Dynamic Analysis
To Use Previous Analysis Results in a Dynamic Analysis
This procedure assumes you are in the dialog box for creating one of these analysis types: dynamic time, dynamic frequency, dynamic random, or dynamic shock.
1. Click the Previous Analysis tab on the dialog box.
2. If you want to use the results from a previously run modal analysis associated with a different design study, select the check box Use modes from previous design study.
If you do not select this check box, Creo Simulate runs a modal analysis as part of running your dynamic analysis.
3. Select the following items to include in your dynamic analysis:
◦ design study (if applicable)
◦ analysis
The name of the constraint set for the modal analysis you selected appears in the Constraint Set field.
To return to the procedure for creating your analysis, click one of the links below.
To Create a Dynamic Time Analysis
To Create a Dynamic Frequency Analysis
To Create a Dynamic Random Analysis
To Create a Dynamic Shock Analysis
這是否有幫助?