To Add a Corner Condition for a Contouring NC Sequence
1. From the NC Seq tabbed page, select the desired NC sequence.
2. Click > . The SMT NC SEQUENCE dialog box opens.
3. Select Corner Conditions and click Define. The Corner Conditions dialog box opens.
4. Click the type of Concave corners and Convex corners that you want to apply to the part and specify the required values for the corresponding corners.
5. If required, click 
and set the dwell time.
and set the dwell time.6. Click Preview to view the results.
7. Click Corner information.
8. Use 
or 
to highlight a specific corner. Highlighted corners can be edited or deleted as required.
or to highlight a specific corner. Highlighted corners can be edited or deleted as required.9. If required, highlight a specific corner and click Delete to delete the corner.
10. Click OK.