建立 ModelUPDATE 的視圖
您可指定將由 ModelUPDATE 建立的視圖的細節 (若在 CREATE_VIEW 檢查中如此配置)。在起始組態檔案中使用下列格式:
PRT_CREATE_VIEW [view name] [axis] [direction] [reference axis] [orientation]
ASM_CREATE_VIEW [view name] [axis] [direction] [reference axis] [orientation]
其中
• [view name] 是視圖名稱。名稱不區分大小寫。
• [axis] 是視圖的主軸。值為 X、Y 或 Z。
• [direction] 是主軸方向。值為 0 (遠離您) 或 1 (朝向您)。
• [reference axis] 是視圖的次軸。值為非主軸的另外兩個軸。
• [orientation] 是繞著主軸的參照軸角度 (逆時針方向),以度為單位。值為 0、90、180 與 270。
例如:
PRT_CREATE_VIEW MC_VIEW1 X 1 Y 270
PRT_CREATE_VIEW MC_VIEW2 Y 0 Z 90
ASM_CREATE_VIEW MC_VIEW1 X 1 Y 270
ASM_CREATE_VIEW MC_VIEW2 Y 0 Z 90