Examples: Creating a Customized Report on a CMM Process
Example 1: Probe Listing
To produce the probe listing for a CMM model, define your repeat regions as shown in the illustration below (enter report symbols into cells as shown).
The resulting table may look like the one shown below.
PROBE LISTING for SUPPORT_PLATE | ||||
|---|---|---|---|---|
OPERATION | MACHINE | PROBE | COMMENT | REGISTER |
OP010 | MACH01 | FIX_PRB1 | 3 | |
FIX_PRB2 | Tip1 | 5 | ||
FIX_PRB2 | Tip2 | 7 | ||
ROT_PRB1 | 0_30 | 9 | ||
ROT_PRB1 | 30_60 | 11 | ||
Example 2: Accessing CMM Step Parameters
To produce a listing of all CMM steps along with selected parameters, define your repeat regions as shown in the illustration below (enter report symbols into cells as shown).
 | To enter PROBE and NUMBER SLICES symbols in the example above, choose Report Sym from the ENTER CELL menu, then choose mfg, oper, ncseq, User Defined, and type tool_id or number_slices, respectively. |
The resulting table may look like the one shown below.
OPERATION | STEP NAME | PROBE | NUMBER SLICES |
|---|---|---|---|
OP010 | 1: MEAS_PLN01 | FIX_PRB1 | |
2: MEAS_CYL01 | FIX_PRB2 | 2 | |
3: MEAS_CYL02 | FIX_PRB2 | 3 | |
4: CON_CIR01 | |||
5: MEAS_CIR02 | ROT_PRB1 | ||
6: MEAS_CON01 | ROT_PRB1 | 6 | |
7: VER01 | |||
8: VER02 |