Creo NC Sheetmetal > Machine Zones and Clamps > To Create a Cosmetic Section
To Create a Cosmetic Section
1. Select the Wrkcell tabbed page from the SMT MFG MACHINING dialog box.
2. Click Zones > Cosmetic > Create Cosmetic. The Cosmetic Section dialog box opens.
3. Click Sketch to define a new cosmetic or Retrieve to retrieve an existing cosmetic.
4. You can position a cosmetic using the following options:
X Offset—Enter a value for the x offset from Machine Csys. Press ENTER.
Y Offset—Enter a value for the y offset. Press ENTER.
Angle—Enter the angle of rotation of the pad about the anchor point. Press ENTER.
Drag—Place the pad using the mouse buttons as follows:
LEFT—Finalizes the placement of the pad.
MIDDLE—Pauses. The LinearIncr and AngularIncr options change drag increments. The effect is similar to the grid snap in Sketcher (e.g., you might want to enter a rotational increment of 90). A drag increment of 0, at any point, is equivalent to "grid snap off." Click Done to continue the placement process. To bring the pad back to the Machine Csys location, click Quit.
RIGHT—Switches between dragging and rotating the pad.
5. Click Done.
这对您有帮助吗?