About the Fillet Weld Dimensioning Scheme
The following dimensioning schemes are available for creating fillet welds:
|
Dimensioning Scheme
|
Definition
|
Values on Fillet Weld Tab
|
Reference Collectors on Location Tab
|
|---|---|---|---|
|
D x D (ANSI only)
|
One length dimension for two identical legs
|
One length value
|
Side 1 and Side 2 collect surfaces
|
|
D1 x D2 (ANSI only)
|
Two different length dimensions, one for each leg.
|
Two length values
|
Side 1 and Side 2 collect surfaces
|
|
A (ISO only)
|
Distance from the weld surface to the trajectory (throat thickness)
|
One throat thickness value
|
Side 1 and Side 2 collect surfaces
|
|
Z (ISO only)
|
Maximum leg length
|
One length value
|
Side 1 and Side 2 collect surfaces
|
|
Z1 x Z2 (ISO only)
|
Two different length dimensions, one for each leg.
|
Two length values
|
Side 1 and Side 2 collect surfaces
|
 |
Angle of the projection of the side 1 chain to the side 2 surface
|
One angle value
|
Side 1 collects chains, Side 2 collects surfaces, and for solid weld representation, Side 1 Weld Surfaces collects surfaces
|
 |
Two chain values
|
Side 1 and Side 2 collect chains, and for solid weld representation, Side 1 Weld Surfaces and Side 2 Weld Surfaces collect surfaces
|