Maintaining Tangency
When you modify geometry using Move, Offset, or Modify Analytic in Creo Flexible Modeling, you can maintain the tangency between the transformed geometry and the neighboring geometry.
1. In Creo Parametric, set the working directory to <downloaded files location>, and open tangency_propagation_ex.prt.
2. To disable all datum display filters, click Datum Display Filters on the in-graphics toolbar, and clear all the check boxes.
3. To set the model view, click Saved Orientations in the graphics window, and select VIEW 1.
4. Click the Flexible Modeling tab.
5. Select the yellow outer round surface.
6. In the Transform group, click Modify Analytic. The Modify Analytic Surface tab opens.
7. Pull the drag handle to increase the radius of the round to 0.6. Notice that the transformed geometry is not tangent to the adjacent geometry.
8. To maintain existing tangency by modifying the geometry that is next to the transformed geometry, on the tab, click . Symbols for the default tangency conditions appear.
9. Pull the drag handle to increase the radius of the round to 0.75. Notice that the transformed geometry is tangent to the neighboring geometry.
10. To add a tangency condition:
a. Right-click next to the model, and choose Add condition from the shortcut menu. The Conditions dialog box opens.
b. Click the lower edge of the geometry included in the tangency. In the Conditions dialog box, an item appears under Reference, and the Applicable Conditions changes to Fixed.
c. Click OK. The symbol changes to show the condition type. Now that the condition for the edge is set to Fixed, the edge will not move when the round radius value changes.
Move the drag handle and see that the edge with the Fixed condition doesn’t move.
11. Click Saved Orientations in the graphics window, and select VIEW 2.
12. To add a tangency condition:
a. Click the Conditions tab. The Conditions dialog box opens.
b. Under Conditions, select Add new.
c. Select the blue middle round surface, between the two edges.
1. Blue middle round
d. Under Type, select Fixed. A condition symbol appears for the surface.
13. To change the condition to a different type:
a. Click the symbol of the condition you created in the previous step.
b. To maintain a constant radius of the round when the overall shape of the selection changes, select Fixed with tangency from the shortcut menu. The condition symbol changes.
Pull the drag handle and observe the model, and then return the radius of the round to 0.75.
14. Click to accept the feature.
15. Save and close the model.