Creating High Speed Rest Finish Sequence
1. Click > . The HSM Rest Finish tab opens.
2. Click 
and create a 6X3 BALL_MILL tool with a cutter diameter of 6 mm.
and create a 6X3 BALL_MILL tool with a cutter diameter of 6 mm.3. On the References tab, click the Mill window collector and on the Model Tree, select Mill Window 1. By default, the 10X5 tool is selected as Reference Cutting Tool.
4. On the Parameters tab, the parameters are populated automatically, based on the tool diameter. To optimize the toolpath, set values as shown for the following parameters:
◦ FEED_UNITS = MMPM
◦ FINISH_STOCK_ALLOW = 0
◦ STEP_OVER = 0.2
◦ FINISH_OPTION = CONSTANT_CUSP
◦ SPINDLE_SPEED = 8500
5. Click the arrow next to 
and then click 
. The Material Removal tab opens.
and then click . The Material Removal tab opens.6. On the Material Removal tab, click > . The Load stock dialog box opens.
7. Select hsm-finish.bin and click Open.
8. Click to open the Play Simulation dialog box.
to open the Play Simulation dialog box.9. Click 
to play simulation.
to play simulation.
10. On the Material Removal tab, click 
and then on the HSM Rest Finish tab, click OK to complete the sequence.
and then on the HSM Rest Finish tab, click OK to complete the sequence.