Cyclone Separator Exercise 5—Creating Monitoring Points
1. In the Post-processing group, click 
Monitor Points. Under 
Results > Monitoring Points, Point 01 is selected. The Point 01Properties dialog box opens.
Monitor Points. Under Results > Monitoring Points, Point 01 is selected. The Point 01Properties dialog box opens.2. In the Properties panel, Model tab, or in the Point 01Properties dialog box, set values for the options as listed below:
◦ Position—0.001274, -0.450, -0.003
◦ Flow:
▪ Output Properties—Yes
▪ Output Derived Variables—Yes
3. In the Functions panel, click 
Turn on/off view properties and select 
Hide all surfaces from the list. The monitoring point appears as shown in the image.
Turn on/off view properties and select Hide all surfaces from the list. The monitoring point appears as shown in the image.