Surfacing > Creo Interactive Surface Design (Style) > Surfaces > Reparameterization Curves > To Delete Reparameterization Curves
To Delete Reparameterization Curves
1. Open the Surface tab for the surface on which reparameterization curves exist.
2. Click Reparameterization. Reparameterization mode is activated.
3. Select a reparameterization curve in the graphics window, or click the Parameterization tab and select a curve from the Reparameterization Curves List.
4. Right-click and choose one of the following commands:
◦ Delete—Deletes the selected reparameterization curve.
◦ Delete from Direction—Deletes all reparameterization curves in the direction of the selected curve (U or V).
◦ Delete all—Deletes all reparameterization curves on the surface.
5. Click Reparameterization to exit Reparameterization mode.
6. Click OK.