Simulation > Creo Simulate > Reference Links > Maximum—Time or Frequency Evaluation Method
Maximum—Time or Frequency Evaluation Method
Creo Simulate calculates the measure using one of several methods, depending on whether you selected At Point or Maximum as the spatial evaluation method and which time span you selected from the Dynamic Evaluation option menu.
If you selected At Point as the spatial evaluation method, Creo Simulate calculates the quantity maximum at a selected point over all the time or frequency steps. Depending on which time span you select from the Dynamic Evaluation option menu, Creo Simulate calculates the quantity maximum over the entire analysis or over a specified time range.
If you selected Maximum as the spatial evaluation method, Creo Simulate calculates the quantity maximum over the model at each step. The software then compares these values and reports the highest value it finds among the steps. Depending on which time span you select, Creo Simulate calculates the quantity maximum over the entire analysis or over a specified time range.
You can find the measure value in the summary file. If you select a spatial evaluation of Minimum or Max Abs, this option is not available.