Piping > Piping > Manufacturing > Piping Information in Non Spec-Driven Piping > Piping Bend Information > To Set Up Piping Bend Information for Use in Report Tables
To Set Up Piping Bend Information for Use in Report Tables
1. To link the coordinate system to the correct pipe segment, click Piping Info. The Report Pipeline dialog box opens.
2. Under Info Type, click Show Report Setup.
3. Select a segment with .
4. Select a coordinate system in the active assembly or create a new one. The Results box displays the piping segment bend information for Drawing report tables and the bend location information.
You can select multiple coordinate systems for each type of bend information. To set up bend information for another segment or for additional coordinate systems, repeat Steps 2 and 3.
The information marked by clicking the Designate for Report Setup check box while generating the bend machine or location table and the holes report is available in the Names Designated for Report Setup box.
5. Click Info. The INFORMATION WINDOW with the piping segment bend information for report tables and the bend location information opens. You can now access this information in a Drawing report table.
6. Create a drawing with a repeat region table, adding the appropriate pipe segment parameters.
7. Set the table to the appropriate active assembly, set the attributes to Recursive, and update the table.