To Import Files Into Sketcher
1. Click > 
Import. The Open dialog box opens.
Import. The Open dialog box opens.2. Select the required file from the list of available files and click Open. The INFORMATION WINDOW displays information about the file processing. You can only import Draft Entities from a drawing.
3. Click Close. The INFORMATION WINDOW closes and the pointer includes a plus sign (+). You must select a location to place the imported drawing.
4. Click to place the imported entities. The entities are placed at the selected location and the Import Section or Import/Drawing tab opens.
5. Adjust the placement, orientation, and size of the set of imported entities in one of the following ways:
◦ Click and drag the following handles as necessary:
▪ 
—Moves the entities
—Moves the entities▪ 
—Rotates the entities
—Rotates the entities▪ 
—Resizes the entities
—Resizes the entitiesMiddle-click to accept the changes. The section is placed.
◦ Define values and select references as necessary in the Import tab:
▪ Select a rotation reference in the sketch window.
▪ Type a value for the rotation in the Angle box and press ENTER to see a preview.
▪ Type a value for the scale in the Scaling factor box and press ENTER to see a preview.
Click 
.
.