To Control the Display of Dimensions

Part Modeling > Sketcher > Dimensioning Sketcher Geometry > To Control the Display of Dimensions

Perform one of the following operations:

• Set the sketcher_disp_dimensions and the sketcher_disp_weak_dimensions configuration options.

• Click or clear the Show dimensions and Show weak dimensions check boxes in the Sketcher area of the Creo Parametric Options dialog box.

• Click Setup > Show >

Dimensions Display. Or Setup > Show >

Weak Dimensions Display.

• Toggle the

Dimensions Display button in the

Sketcher Display Filters on the Graphics toolbar.

• Click View > Display >

Disp Dims.

Setting the Color of Dimensions

To change the default colors for strong dimensions, weak dimensions, and locked dimensions, follow the steps below:

1. Click File > Options. The Creo Parametric Options dialog box opens.

2. Click System Appearance.

3. Click the arrow next to Sketcher.

4. To redefine the color, click the color button to the left of a conductor type. A color palette appears.

5. Select a color from Theme Colors. The color button shows the selected color.

6. To revert to the default color, click Use Default .

7. Click OK.