Part Modeling > Part Modeling > Base Features > Sweeps > Workflows > Workflow for Sweeping with Default Settings - X-Trajectory
Workflow for Sweeping with Default Settings - X-Trajectory
1. Open the Sweep tool.
2. Select the origin trajectory.
3. Preview geometry.
4. Select an additional trajectory.
5. Make the additional trajectory an x-trajectory.
6. Change the Horizontal/Vertical control to X-Trajectory.
7. Sketch a section for sweeping.
8. Preview geometry and complete the feature.
* 
If the section plane's horizontal direction is changed drastically and the section is too constrained (for example, section entities aligned to some trajectory intersection point), this might cause a loss of references. Start Sketcher to resolve the references.