To Create an Auto Round Feature on Selected Edges
1. Click
Model, click the arrow next to
Round, and click
Auto Round. The
Auto Round tab opens.
2. Under
Scope, select
Selected Edges. The selected edges collector is activated.
3. To select edges to round, perform one of the following actions:
◦ Select the edges to round in the graphics window.
◦ Select edges using the search tool:
1. Click > . The Search Tool dialog box opens.
2. Under Look for, select Edge or Intent Chain.
3. Under Look by, select one of Edge, Feature, Group, or Intent Chain.
4. Click the Attributes, History, Status, or Geometry tabs and specify the criteria by which you want to search for edges or intent chains.
5. Click Find Now. The Search Tool displays the results under items found.
6. Select the required items listed under items found. The corresponding items are highlighted in the graphics window.
7. Click
to transfer the items to the items selected area of the
Search Tool dialog box.
8. Click Close. The Search Tool dialog box closes.
4. Click > . The selected edges are added to the Selected Edges collector.
5. Specify other options as required, and click
OK to create an auto round feature.