Part Modeling > Part Modeling > Engineering Features > Cosmetic Sketch > About the Cosmetic Sketch User Interface
About the Cosmetic Sketch User Interface
The Cosmetic Sketch user interface consists of the Cosmetic Sketch dialog box. Click Model > Engineering > Cosmetic Sketch to open the Cosmetic Sketch dialog box.
Cosmetic Sketch Dialog Box
The Cosmetic Sketch dialog box contains the following tabs:
Placement
Plane collector—Displays the sketching plane or planar surface.
Use Previous—Uses the same sketch plane and orientation settings as the last created sketch
Sketch view directionFlip—Reverses the sketch plane direction to the opposite side of the planar reference.
Reference—Displays the reference that defines the view orientation.
Orientation—Defines the direction that the orientation reference represents.
Properties
Name box—Sets a name for a cosmetic sketch.
—Displays detailed component information in a browser.
Add cross-hatching check box—Displays cross hatching for a closed section.
Scale—Sets the scale for the cross hatching.
Angle—Sets the angle for the cross hatching.