Mold Design and Casting > Mold Design and Casting > Waterlines > To Create Water Lines
To Create Water Lines
1. On the Mold or Cast tab, click Water Line. The Water Line dialog box opens.
2. Specify a diameter value for the waterline or accept the default value.
3. Sketch the path of the waterline circuit using the SETUP SK PLN menu.
* 
The section cannot contain any non-linear entities.
4. Select the parts that the waterline feature will intersect. This can be done automatically or manually.
5. To specify the end condition, select End Condition from the Water Line dialog box and click Define.
6. Select the corners from segments on which you want to specify the end condition and the type of end condition. The options are None, Blind, Thru, and Thru w/Cbore.
7. Click Done/Return to create the waterline feature.
About Water Lines
To Check Waterline Circuits