Model Analysis > Creo ModelCHECK > Configuring PTC Creo Modelcheck > Setting Up the Check Configuration File > To Set Up the Check Configuration File Using the PTC ModelCHECK Configuration Tool
To Set Up the Check Configuration File Using the PTC ModelCHECK Configuration Tool
1. Click adjacent to Configuration settings in the left pane of the ModelCHECK Configuration Tool dialog box.
2. Click adjacent to Check files.
3. A table listing the checks and their values appears in the right pane of the ModelCHECK Configuration Tool dialog box. Click Create new file to create a new check configuration file or select the required check file. A table listing all the checks with their values appears in the right pane of the ModelCHECK Configuration Tool. The Select check box is selected for all existing checks. In the case of a new check file the Select check box is not selected for any of the checks.
4. To add a new check to the check configuration file select the Select check box for the check. Clear the Select check box to remove a check from the check file.
5. To configure a selected check for a mode, select one of the following options for each mode:
Y(Yes)—Runs the check for the selected mode.
N(No)—Does not run the check for the selected mode.
E(Error)—Displays an error message if the check fails.
W(Warning)—Displays a warning message if the check fails.
6. Select a row and then right-click and click Add Row to add a new check to the check file. The new check is added to the Custom area of the ModelCHECK Configuration Tool.
7. Click Delete if you want to delete the file.
8. Click Apply to save your changes to the current file or Save as to specify a different file.