To Place a Manikin into a Scenario
1. Open a saved design assembly into which to place the manikin.
2. Click > 
Insert Manikin. The Open dialog box showing the manikin library and the Place Manikin dialog box open.
Insert Manikin. The Open dialog box showing the manikin library and the Place Manikin dialog box open. | For information about setting the path to the library, see the Related Links. |
3. In Open dialog box, select a manikin model from the list, and click Open.
4. In the Place Manikin dialog box, select or clear the Use placeholder check box.
| | By default, the manikin model is automatically assembled into a placeholder assembly before it is inserted into the design scenario. Although this is considered the best practice, you can clear the placeholder check box to insert a manikin model without a placeholder assembly. |
5. Type a name for the manikin model or accept the default name.
6. To set the manikin’s posture, select the Standing or Sitting check box.
7. To select a surface for the manikin to stand or sit on, click the Place on collector, and select a curved or flat surface. Click 
to flip the direction 180°.
to flip the direction 180°.8. To select a direction for the manikin to face, click the Facing collector, and select a surface or datum plane. Click to flip the direction 180°.
to flip the direction 180°.9. Click OK.