Adding Features
The Add Feature command is available when the dimensions are visible in the graphics window. To see the dimensions in the graphics window, you must open the Stackup Details table.
1. On the EZ Tolerance tab, click Add Feature. The Add Feature dialog box opens.
2. Select faces, edges, or points in the graphics window. Alternatively, click 
to add a width or a slab and then select two parallel faces.
to add a width or a slab and then select two parallel faces.3. Click Apply to continue adding more features, or click OK. The Stackup Details table opens.
4. Click Cancel to close.
5. In the Stackup Details table, click 
, the Reorder Features dialog box opens.
, the Reorder Features dialog box opens. | When there are 4 or more features in a part, you can change the order of the inner features. A change in order reflects a different series of dimensions. The new dimensions are created between each of the features in the order they appear in the table. |
6. Select a feature and click 
or 
to move it up or down the order.
or to move it up or down the order.7. Click 
to delete a row from the table. For example, when you want to remove a feature from the stackup so that the two dimensions between the surrounding features change to a single dimension.
to delete a row from the table. For example, when you want to remove a feature from the stackup so that the two dimensions between the surrounding features change to a single dimension.