To Remove Jogs
• To remove a jog from a witness line:
1. Select one or more dimensions.
2. Place the pointer over a jog dragger and right-click.
3. Click Remove Jog on the shortcut menu. The jog dragger and its associated jog are removed. Jog dragger are handles at the start and end points of the jog.
• To remove all jogs from a single witness line:
1. Select a dimension.
2. Move the pointer close to a witness line from which you want to remove a jog till the pointer changes to 
.
.3. Right-click and click Remove Jogs on the shortcut menu. All jogs on the witness line are removed.
• To remove all jogs from one or more witness lines:
1. Select one or more dimensions.
2. Right-click outside the model in the graphics window.
3. Click Remove All Jogs on the shortcut menu. All jogs on the witness lines of all selected dimensions are removed.
• To remove jogs dynamically, drag the jog draggers at the jog points to overlap each other.
 | You cannot move the jog dragger beyond the clip witness line dragger or the dimension leader line. |