To Move a Datum Target
Click the datum target and move the pointer to a location of your choice on the graphics window.
To move a datum target to a plane, click Move to Plane on the shortcut menu.
Alternatively, you can use the Move command to move the datum target. This command is supported for placed with a leader placement type.
To move a datum target using Move, follow these steps:
1. Select the datum target from the model tree or in the graphics window. Right-click the datum target and select Move from the shortcut menu.
2. Move the pointer to the new location and, click to place the datum target in the desired location, or middle-click to cancel the operation.