To Specify Local Stock Allowance for Classic Sequences
1. On the INT CUT menu, click Stock Allow.
2. Click Define. In Area, 4 Axis Area, and Groove Turning, you can specify separate local stock allowance for Rough and Profile cuts by using the Rough Portion or Profile Portion option, respectively.
3. Select a chain of entities on the Turn Profile by using the From-To option and selecting two vertices (or choose Select All), and enter a value for local stock allowance.
The system displays the expected final tool pass by applying the values listed below and the local stock allowance you specified to the Turn Profile:
◦ For Rough Portion and for Profile Turning—Ends adjustments, corner conditions, ROUGH_STOCK_ALLOW, Z_STOCK_ALLOW.
◦ For Profile Portion—Ends adjustments, corner conditions, PROF_STOCK_ALLOW, Z_STOCK_ALLOW.
4. Repeat Step 3 to apply other local stock allowances, or click Done/Return to finish.
 |
You can not apply more than one local stock allowance to the same entity.
|
5. The following options are available to manipulate existing local stock allowances:
◦ Modify—All local stock allowance values are displayed. Use the Dimension option, select a value you want to modify, and enter a new value. You can also modify the underlying parameter values: use the Parameter option, check off the stock allowance parameter(s) you want to modify, and enter the new value(s).
◦ Remove—Select the pair(s) of vertices where local stock allowance is specified (you can also use Select All). Once you remove a pair, stock allowance control reverts to parameter values.
◦ Info—Displays the expected final tool pass, along with stock allowance values.