To Select Holes by Surfaces
1. You can include holes on a surface in one of the following ways:
◦ On the References tab, click in the Holes collector and select a surface to include all holes on the surface.
◦ Select the surface when the Holes collector on the Reference tab is active. All holes on that surface are selected for drilling.
◦ Click Rule: surfaces in the Holes dialog box and select a surface to include all holes on the selected surface.
2. To remove all holes located on a surface, select its name in the collector and click Remove.
Example
The following example shows all holes on a selected surface.
1. Select this surface
2. Retract plane