To Define a Turn Profile by Sketching
1. On the Turn Profile tab, click 
.
.2. Click the Placement tab and specify the reference coordinate system in the Placement Csys collector. Creo NC reorients the model so that the XZ plane of the Turn Profile coordinate system is parallel to the screen and displays the Sketcher side bar.
3. Click 
, select the Sketcher references, sketch the Turn Profile, and dimension as necessary. The sketch must consist of a single chain of entities. Click Continue to exit Sketcher. The Turn Profile is created.
, select the Sketcher references, sketch the Turn Profile, and dimension as necessary. The sketch must consist of a single chain of entities. Click Continue to exit Sketcher. The Turn Profile is created.4. If necessary, adjust the curve using the options on the Profile tab.
5. Click 
.
.