Notification Manager Configuration Options
The first configuration option below controls the behavior of the Notifications message that opens at the bottom of the graphics window.
nmgr_toaster_bhvr
dont_show, show_and_dissolve*, show
Sets the way the Notification message opens in the graphics window.
dont_show—The Notifications message does not open automatically, it opens when you click the flag.
show_and_dissolve—The Notifications message opens when you open a model with notifications and disappears in a few seconds. Click the flag to open the alert again.
show—The Notifications message opens when you open or regenerate a model with notifications and stays open until you close it.
Notification Center Configuration Option Values
The following four values apply to the Notification Center configuration options below. The default value for each option is followed by an asterisk (*).
error—Shows this type of notification as an error.
warning—Shows this notification type as a warning.
warning_with_message—Shows this type of a notification as a warning. When there are notifications, the Notifications dialog box opens after opening the model and on regeneration of the model.
do_not_show—Does not show notifications.
nmgr_affected_by_dma
warning*, do_not_show, warning_with_message, error
Shows notifications for models and features affected by modifications to models and features in Creo Direct.
nmgr_annotation_warning
warning*, do_not_show, warning_with_message, error
Shows notifications for annotation features with missing references.
nmgr_circular_references
warning, do_not_show, warning_with_message*, error
Shows notifications for circular references in the top-level assembly.
nmgr_critical_server_info
warning, do_not_show, warning_with_message*, error
Shows notifications for critical information from a server.
nmgr_disconnected_sensor
warning, do_not_show, warning_with_message*, error
Shows notifications when not all parameters of a sensor are connected to a parameter or dimension in the assembly or component.
nmgr_failed_annotation
warning, do_not_show, warning_with_message, error*
Shows notifications for failed annotations.
nmgr_failed_drf_csys
warning, do_not_show, warning_with_message, error*
Shows notifications for a failed Datum Reference Frame (DRF) coordinate system.
nmgr_gen_model_issues
warning, do_not_show, warning_with_message*, error
Shows notifications when regeneration fails for the generic model of the specified Family Table instance.
nmgr_import_valid_issues
warning, do_not_show, warning_with_message*, error
Shows notifications when the import validation score passes with a warning.
nmgr_model_in_discon_state
warning, do_not_show, warning_with_message*, error
Shows notifications when a mechanism connect operation fails during regeneration, analysis, or dragging.
nmgr_modified_in_dma
warning*, do_not_show, warning_with_message, error
Shows notifications for components repositioned in Creo Direct. You must restore parametric behavior to these components before you can update or modify their positions in Creo Parametric.
nmgr_outdated_mathcad
warning*, do_not_show, warning_with_message, error
Shows notifications for models with an embedded Mathcad worksheet that contains values different from those in Creo Parametric.
nmgr_outdated_model_graphics
warning, do_not_show, warning_with_message*, error
Shows notification when a models in a simplified representation is outdated.
nmgr_outdated_mp
warning, do_not_show, warning_with_message*, error
Shows notifications for mass properties requiring recalculation.
nmgr_outdated_non-native
warning*, do_not_show, warning_with_message, error
Shows notifications for non-native models that are not up-to-date with the source models.
nmgr_outdated_pdm
warning, do_not_show, warning_with_message*, error
Shows notifications for models that are not up-to-date with the model in PDM.
nmgr_outdated_pipe_solids
warning*, do_not_show, warning_with_message, error
Shows notifications for legacy pipe solids in the design. These are models created before Creo 2.0 M150 or Creo 3.0 M050.
nmgr_pending_dma
warning, do_not_show, warning_with_message*, error
Shows notifications for models that were modified in Creo Direct and were not reviewed. Accept or reject the changes in the View Changes dialog box.
nmgr_reference_changed
warning, do_not_show, warning_with_message*, error
Shows notifications for models and features whose references were changed since the last regeneration.
nmgr_reference_out_of_session
warning, do_not_show*, warning_with_message, error
Shows notifications for models and features with references not in session.
nmgr_ref_model_issues
warning, do_not_show, warning_with_message*, error
Shows notifications when a reference model fails regeneration.
nmgr_server_warning
warning, do_not_show, warning_with_message*, error
Shows notifications when there are warnings from a server.
nmgr_sesnor_data_replay
warning, do_not_show, warning_with_message*, error
Shows notification when sensor data download from the ThingWorx server is complete.