To Change Bend Settings
1. In an open board part, click > > 
Model Properties. The Model Properties dialog box opens.
Model Properties. The Model Properties dialog box opens.2. Under Board, click change in the Bends line. The Preferences dialog box opens.
3. Click Bends.
4. To specify a different value for the bend radius, type a new value in the box, or select a value from the list.
5. Set the bend dimension location:
◦ Inside—Dimensions the radius from the inside surface of the bend.
◦ Outside—Dimensions the radius from the outside surface of the bend.
6. To specify a different bend angle, type a new value in the box or select a value from the list.
7. Click OK and regenerate the model.