About the Bend User Interface
The Bend user interface consists of commands, tabs, and shortcut menus. Click Model > Bend to access the Bend tool.
Use the following configuration options to control the default values and behavior of selected tool settings:
board_drive_tools_by_parameters—Uses parameter values as the default values of selected tool settings and to automatically update features when parameter values change.
board_drive_bend_by_parameters—Uses parameter values to control the default value of bend angle and bend dimension location settings and to automatically update features when parameter values change.
* 
If you want to enable board_drive_bend_by_parameters, you must also set board_drive_tools_by_parameters to yes.
In the following descriptions, [<Parameter Value>] indicates that tool settings are controlled by parameters.
Commands
Bend Type commands:
Angle—Bends the material using a value to define the bend angle.
Roll—Bends the material to the end of the surface.
Bend Settings commands:
Fixed Side—Flips the area that remains fixed.
* 
When you flip the area that remains fixed, the original bend ID is applied to the new fixed side.
Bend Area Position commands:
Starts at Bend Line—The bend area starts at the bend line.
Ends at Bend Line—The bend area ends at the bend line.
Centered on Bend Line—The bend line is in the middle of the bend area.
Bend Dimensions commands:
Radius—Sets the bend radius thickness and dimension location option.
Thickness—Uses a radius equal to the thickness of the segment.
2.0 * Thickness—Uses a radius equal to twice the thickness of the segment.
[<Parameter Value>]—Uses a radius set by the SMT_DFLT_BEND_RADIUS parameter.
—Dimensions the bend from the outside surface.
—Dimensions the bend from the inside surface.
—Dimensions the bend according to the location set by the SMT_DFLT_RADIUS_SIDE parameter.
Angle—Sets the bend angle and the bend dimension scheme.
Select an angle from the list or type an angle.
—Flips the bend direction.
—Dimensions the bend angle by measuring the resulting internal angle.
—Dimensions the bend angle by measuring the deflection from straight.
Tabs
Placement
Use this tab to select bend line references.
Bend surface or bend line—Displays a surface, edge, or curve reference.
When an edge or curve is selected, these options are available:
Details—Opens the Chain dialog box that displays detailed information about the selected edge chain.
Offset bend line—Offsets an edge or curve reference by a specified value.
Bend Line
Use this tab to sketch or locate the ends of a bend line, when a surface reference is selected.
Sketched bend line—Click Sketch to open Sketcher to sketch a bend line.
Bend line end 1—Sets the references for the first end of the bend line.
Reference——Displays the surface, edge, or vertex reference in the collector.
Offset reference—Displays the surface or edge offset reference in the collector. Specify a value in the box.
Bend line end 2—Sets the references for the second end of the bend line.
Reference—Displays the surface, edge, or vertex reference in the collector.
Offset reference—Displays the surface or edge offset reference in the collector. Specify a value in the box.
Transitions
Use this tab to sketch transition areas.
Lists any sets of transition areas. Click Add Transition to define a new transition area.
Sketch—Opens Sketcher to sketch a transition area.
Remove—Removes a transition area.
Flip—Flips the location of the transition area to other side of bend line.
Relief
Use this tab to define relief.
Define each side separately— Sets the relief for each side of the bend separately.
Side 1—Sets the relief for the first end of the bend.
Side 2—Sets the relief for the second end of the bend.
Type—Lists the types of relief:
No Relief—Adds no relief.
Slit
—Adds a slit relief.
Stretch—Adds a stretch relief.
Rectangular—Adds a rectangular-shaped relief.
Obround—Adds an obround-shaped relief.
[<Parameter Value>]—Adds a relief set by the BOARD_BEND_REL_TYPE parameter.
Bend Allowance
Use this tab to set a feature-specific bend allowance to calculate the developed length of the bend. When you click A feature specific set up, these options become available:
By K factor—Calculates the developed length according to the K factor. To change the value for K factor, type a new factor value or select a value from the list.
By Y factor—Calculates the developed length according to the Y factor. To change the value for Y factor, type a new factor value or select a value from the list.
By bend table—Calculates the developed length using a bend table. To choose a different bend table, select one from the list.
Properties
Use this tab to display detailed feature information.
Name—Shows a feature name.
—Shows feature information in a browser.
Shortcut Menus
Right-click the graphics window to access the shortcut commands:
Bend Surface or Bend Line—Activates the Bend surface or bend line collector.
Bend Line End 1 Placement—Activates the reference collector for the first end of the bend line.
Bend Line End 2 Placement—Activates the reference collector for the second end of the bend line.
Bend Line End 1 Offset—Activates the offset reference collector of the first end of the bend line.
Bend Line End 2 Offset—Activates the offset reference collector of the second end of the bend line.
Clear—Removes the reference from the active collector.
Define/Edit Internal Bend Line—Opens Sketcher to sketch a bend line.
Flip Fixed Area—Flips the area that remains fixed.
Angled Bend—Bends the material using a value to define the bend angle.
Rolled Bend—Bends the material to the end of the surface.
Offset Bend Line—When an edge or a curve is selected, offsets the reference by a specified value.
Flip Bending Direction—Flips the bending direction to the other side of the reference.
Right-click the Bend Location handle to access the shortcut commands:
Side 1—Bends the material up to the bend line.
Side 2—Bends the material on the other side of the bend line.
Both Sides—Bends the material on both sides of the bend line.
Right-click the Relief handle and choose Edit Relief to access the shortcut commands:
No Relief—Adds no relief.
Slit—Adds a rip relief and displays handles.
Stretch—Adds a stretch relief and displays dimensions and handles.
Rectangular—Adds a rectangular relief and displays dimensions and handles.
Obround—Adds an obround relief and displays dimensions and handles.
Define each side separately—Sets the type of relief for each end separately.
Exit Edit Relief—Makes the change and exits the Edit Relief menu.
Right-click the Bend Radius handle to access the following shortcut commands:
Inside Radius—Dimensions the radius from the inside surface of the bend.
Outside Radius—Dimensions the radius from the outside surface of the bend.
Right-click the Bend Scheme handle to access the following shortcut commands:
External Dimension—Dimensions the bend angle by measuring the deflection from straight.
Internal Dimension—Dimensions the bend angle by measuring the resulting internal angle.