Electrical Design > Cabling > Using Terminators and Terminator Tables > To Read a Terminator
To Read a Terminator
1. Click Logical Data > Terminators. The TERMINATORS menu appears.
2. Click Read. The Open dialog box opens.
3. Select the terminator that you want to read from the disk.
4. At the prompt, type Yes if you want to overwrite the existing terminator.
To Use a Terminator Table
To Add or Delete Parameters of the Cabling Objects
About Terminators and Terminator Tables
To Modify Terminators
To Rename a Terminator
Assigning a Terminator Based on the Sum of Multiple Wire Widths