Electrical Design > Cabling > Using Terminators and Terminator Tables > To Get Information on Terminators
To Get Information on Terminators
1. Click Tools > Bill of Materials. The Bill of Materials (BOM) dialog box opens.
2. Select the required options and click OK.
A list of all the terminators used and the quantity of these terminators is displayed in the embedded browser.
3. To retrieve terminator information in Drawing reports, ensure that you have set the required harness part or the cabling assembly as the active model.
The report symbols available to retrieve complete terminator information for a given harness are:
&harn.term.name
&harn.term.qty
&harn.term.<User Defined>
The report symbols available to retrieve complete terminator information for the cabling assembly are:
&asm.mbr.connprm.name
&asm.mbr.connprm.pin.name
&asm.mbr.connprm.pin.term.name
&asm.mbr.connprm.pin.term.<User Defined>
Where <User Defined> is the parameter defined by you as per your requirement.
* 
Use Logical Data > Terminators and click List from the TERMINATORS menu to view the list of terminators in the cabling assembly.