To Move a Surface Finish Symbol
You can move a surface finish symbol with a leader by selecting it and dragging it to the required location.
Click and drag the surface finish symbol with the four-way dragger ( ) to the required location, retaining the attachment point.
Select a surface finish symbol, and press SHIFT, to convert the four-way dragger to a way-way dragger (). This allows adjusting the length of the elbow without changing the leader position and elbow intersection point.
Additionally, the secondary draggers are available at the leader attachment point and the elbow end of the surface finish symbol. You can drag these draggers to change the position of the leader of the surface finish symbol.
Alternatively, to move the surface finish symbol using the Move Special command, follows the step given below:
1. Select the symbol that you want to move, right-click, and click Move Special on the shortcut menu. The Move Special dialog box opens.
Alternatively, select the symbol that you want to move and click Edit > Move Special. The Select dialog box opens. Select the symbol you want to move. The Move Special dialog box opens. The point that you select on the symbol acts as a origin to calculate the X and Y coordinates.
2. Select from the following to move the symbol:
—Move object to location defined as X and Y coordinates. Type the required values in the X and Y boxes.
—Move object to location defined by relative X and Y offsets. Type the required values in the X and Y boxes.
—Snap object to a specific reference point on an entity.
Valid entity selections are highlighted when you move the pointer in the graphics window..
—Snap object to a specific vertex.
Valid vertices, including intersections, are highlighted when you move the pointer in the graphics window.
3. Click OK. The symbol is moved to the specified location.
* 
You can move any drawing entity using the Move Special dialog box.