Detailed Drawings > Detailed Drawings > Working with the Drawing Table > Creating and Configuring Report Tables > Using Parameter Values in Report Tables > Example: Body Standard Parameters Report
Example: Body Standard Parameters Report
Consider a part drawing that contains bodies with standard parameters.
The following table shows a repeat region with body parameters of the part drawing:
Item number
Model name
Model parameter name
Model parameter value
Body name
Body parameter name
Body parameter value
&rpt.index
&mdl.name
&mdl.param.name
&mdl.param.value
&mdl.body.name
&mdl.body.param.name
&mdl.body.param.value
The model contains the following entities:
• Parameters M1 and M2 with their values 1 and 2, respectively.
• Two bodies with parameters B1 and B2 with their values 3 and 4, respectively.
The repeat region table of the above model looks as follows:
Item number
Model name
Model parameter name
Model parameter value
Body name
Body parameter name
Body parameter value
1
<model name>
M1
1
2
<model name>
M2
2
3
<model name>
<body1 name>
B1
3
4
<model name>
<body1 name>
B2
4
5
<model name>
<body2 name>
B1
3
6
<model name>
<body2 name>
B2
4