Detailed Drawings > Detailed Drawings > Annotating the Drawing > Working with Datums > Datum Planes > To Modify the Display of a Set Datum Plane
To Modify the Display of a Set Datum Plane
You can lengthen or shorten set datum planes by moving or clipping them. Moving a datum plane moves either side of the datum. Clipping moves the end opposite to the datum name.
1. Select the datum you want to modify. The datum is highlighted and its handles display.
2. Do one of the following:
To move the datum, select anywhere in the drawing window and the datum text moves to a corresponding location along the datum. The name of the datum also flips to the side of the datum where you selected.
To clip the datum, select anywhere and the datum plane moves to a corresponding point along the datum. The datum name does not move.