To Modify an Inserted OLE Object
1. Right-click the object you want to modify. The OLE object shortcut menu appears.
2. On the shortcut menu, click Open if you want to edit the object in its own application window, or click Edit to modify the object within the Creo Parametric environment. If you click Edit, the object opens within the Creo Parametric window, and the application toolbars open below the message area.
3. Edit the object as required.
4. If you are editing the object outside of Creo Parametric, you must update Creo Parametric with the changes to the object. Within the object application window, click > <name>, where <name> is the name of the file type into which you have inserted the object.
5. To exit Edit mode and return to Creo Parametric, do one of the following operations:
◦ If you are editing the object outside of Creo Parametric, open the application File menu and click Exit and return to<name>.
◦ If you are editing the object from within Creo Parametric, click anywhere outside the object window. The application toolbars close and the object displays as edited.