To Modify Section Crosshatches of an Assembly 2D Cross Section
Use the following procedure to show or erase crosshatches associated with a section of an assembly 2D cross section:
1. Open an assembly drawing.
2. Select one or more cross sections from an assembly drawing.
3. Double-click or right-click and click Properties on the shortcut menu. The MOD XHATCH menu appears on the Menu Manager.
4. Click X-Section and Pick to select one or more cross sections.
5. Click Erase to erase crosshatches of the selected cross sections or click Show to display erased crosshatches for the selected cross sections.
6. Click Done to close the MOD XHATCH menu.
 |
You can also use the Erase and Show commands on the shortcut menu to erase or show crosshatches, respectively, for the selected cross sections.
|