Detailed Drawings > Detailed Drawings > Annotating the Drawing > Dimensioning the Model > Working with Witness Lines > To Add a Jog to a Witness Line
To Add a Jog to a Witness Line
1. On the Annotate tab, click Jog.
2. Select the dimension value. (This selects the witness lines.)
3. Click the point on a witness line to insert the jog. Move the mouse to place the jog.
4. Click again to release the jog. The command is still active and you can repeat the process to place another jog. Middle-click to exit the command.
About Modifying Witness Lines