Data Exchange > Associative Topology Bus > Accessing and Using ATB Commands > Selecting Objects and Performing an ATB Action on a Single or All Imported Geometry
Selecting Objects and Performing an ATB Action on a Single or All Imported Geometry
Select a Translated Image Model (TIM) or an Associative Topology Bus (ATB)-enabled feature or a combination of TIMs and ATB-enabled features from the Model Tree or the graphics window. You can also use the search tool to select a TIM or an ATB-enabled feature for a single query.
* 
Do not select a feature or a model that is not ATB-enabled or a combination of ATB-enabled and independent features and parts that are not ATB-enabled.
You can perform the ATB action in one of the following ways:
Use the object/action method of selecting an ATB-enabled feature or a TIM followed by the ATB action.
Clear the selection buffer and select the ATB function without selecting an object.
A prompt in the Creo Parametric message window asks you to confirm if you want to perform the action on all the ATB-enabled imported geometry. Click OK. All imported ATB-enabled features and TIMs in the active model are identified and the action is performed on all of them.
* 
You can only change the link of a single TIM or ATB-enabled feature. The TIM or the ATB-enabled feature with a broken link must be in the selection buffer when you perform the ATB operation.