Assembly Design > Assembly Design > Using Assembly > Managing Views > Exploded Views > To Add or Modify Jogs to Offset Lines
To Add or Modify Jogs to Offset Lines
1. Make sure that you have created at least one offset line and that the Explode Tool tab is open. Select the offset line to edit.
2. Do one of the following operations:
In the graphics window, right-click and choose Edit Explode Line, then right-click and choose Add Jog.
In the Explode Tool tab, click Explode Lines, and click .
A coordinate system appears at each endpoint of a straight offset line, or at each jog of a jogged offset line.
3. Select an axis and drag the coordinate system to the point at which you want to place the jog. The jog is placed.
Offset line endpoints are fixed to the points you selected when creating them.
4. Continue adding or modifying jogs to lines as desired.
5. Click .