To Save a Component Interface When Placing a Component
1. Click 
Assemble. The Open dialog box opens.
Assemble. The Open dialog box opens.2. Select the component to be placed and click Open. The Component Placement tab opens.
3. Select required constraints and references.
4. Right-click in the graphics window and choose Save as Interface from the shortcut menu. The Save as Interface dialog box opens.
5. Accept the default name or enter a new one. Enter a description of the interface if desired.
6. Click OK. A new component interface is saved.
 | You can also right-click a component in the Model Tree and select  from the shortcut menu. Select the required placement set in the Placement tab and proceed from step 4. |