To Move Components Using Adjust
1. In an open assembly, click 
Assemble. The Open dialog box opens.
Assemble. The Open dialog box opens.2. Select the component to be placed and click Open. The Component Placement tab opens.
3. Click Move. The Move tab opens.
4. Select Adjust from the Motion Type list.
5. Click one of the following options and then follow the appropriate steps:
◦ Relative in view plane—Adjusts the component position normal to the view plane.
Select a surface on the component. The component automatically adjusts with the selected surface normal to the view plane.
◦ Motion Reference—Adjusts the component position to a selected reference in the assembly. Reference types allowed are:
▪ A datum point or vertex.
▪ An axis, edge, surface, or datum plane.
▪ A coordinate system direction X, Y, or Z.
1. Select Parallel or Normal.
2. Select Mate or Align as the constraint.
3. Enter an Offset value if required.
4. Select an Adjust Reference on the component. The component position adjusts automatically.
6. To stop movement, click in the graphics window.