To Automatically Create Component Drawings
You can create drawings of components assembled by Creo Advanced Framework as well as automatically dimension profile and plate-shaped parts. You can also change the look of automatically created drawings. To create drawings:
1. On the Framework tab, click > 
Create accumulative dimensions. The Drawing Creation Options dialog box opens.
Create accumulative dimensions. The Drawing Creation Options dialog box opens.2. Select Create part drawings to create single part drawings.
3. Select Create assembly drawings to create subassembly drawings.
4. Select Dimension drawings to create automatically dimensioned profile and plate part drawings.
5. Select Create chain dimensions to use chain dimensions in dimension drawings.
6. Select Create sum dimensions to dimension drawings with sum dimensions or select both Create chain dimensions and Create accumulative dimensions to create both types of dimension.
7. Click OK. The drawings are created.
 | If a component drawing has already been made for a component with the same name, another drawing will not be created. |