About the Position Subassembly Dialog Box
The following commands are available on the Position Subassembly dialog box:
Area
Icon
Command
Reference Method
Assemble on a straight curve
Assemble between two points
References
Click the first reference collector to select the first reference for the profile assembly
Create a sketch with one straight line using the Creo Parametric sketcher tool.
Click the second reference collector to select the second reference for profile assembly, if required
Create a datum point feature using the Creo Parametric datum point tool.
Orientation plane
Click the reference collector to select the orientation plane for the profile assembly, if required
Create a datum plane feature using the Creo Parametric datum plane tool
Move
Move by specific values
Reset subassembly move
Rotate
Rotate by -90°
Reset
Rotate by 180°
Rotate by 90°
Rotate by a specific angle
Toggle start and end points
Filename
Enter a name or accept the default