欲複製或刪除折彎表
1. 按一下 > > 。「模型內容」(Model Properties) 對話方塊開啟。
2. 在「鈑金」(Sheetmetal) 下的「折彎裕量」(Bend Allowance) 行中,按一下「變更」(change)。「鈑金偏好設定」(Sheetmetal Preferences) 對話方塊開啟。
3. 按一下「折彎裕量」(Bend Allowance)。顯示「折彎裕量」(Bend Allowance) 區域。
4. 按一下「零件折彎裕量表」(Part Bend Allowance Tables)。「零件折彎裕量表」(Part Bend Allowance Tables) 對話方塊開啟。
5. 欲複製折彎表至零件,請選取折彎表,然後按一下
![](../../../sheetmetal/sheetmetaldesign/images/mtrl_move_right.png)
,或是按一下滑鼠右鍵並選擇
「複製」(Copy)。
6. 欲從零件中刪除折彎表,請按一下
![](../../../sheetmetal/sheetmetaldesign/images/mtrl_move_left.png)
,或是按一下滑鼠右鍵並選擇
「刪除」(Delete)。即會從零件中移除折彎表,但其仍會存在於目錄中。
7. 按一下「確定」(OK)。