|
If you mix two parameters from different groups in the same repeat region, two sets of reports are created in the table, one located below the other.
|
BOM and Family Table Parameters
|
|
---|---|
&rpt.index
|
Displays the number assigned to each record in a repeat region.
|
&rpt.level
|
Shows the recursive depth of an item.
|
&rpt.qty
|
Displays the quantity of an item.
|
Layer Parameters
|
|
---|---|
dgm.layer.name
|
The layer name.
|
dgm.layer.sym
|
Duplicates the hierarchy under dgm.sym. Only evaluates to symbols on the current layer.
|
dgm.layer.run
|
Duplicates the hierarchy under dgm.run. Only evaluates to runs on the current layer.
|
Diagram Parameters
|
|
---|---|
&dgm.run.cond.color
|
Lists conductor color defined in the spool parameter file for wires belonging to cables. Lists color defined in the spool parameter file for individual wires.
|
&dgm.run.cond.from/to.conn.name
|
Lists the reference designators of the component/connectors or the name of the rail that wires (free wires or wires belonging to cables) are run to/from.
|
&dgm.run.cond.from/to.conn.<User_Defined>
|
Lists specified parameters for the component/connectors or rails that wires (free wires or wires belonging to cables) are run to/from.
Any parameter of the connector or rail can be entered manually.
|
&dgm.run.cond.from/to.pin.name
|
Lists the pin names of the connectors that the wires (except for free wires) are run to/from.
|
&dgm.run.cond.from/to.pin.entry_port
|
Lists the entry port of each pin that conductors are run from or to.
|
&dgm.run.cond.from/to.pin.signal.name
|
Lists the pin signal names of the connectors that the wires (free wires or wires belonging to cables) are run to/from.
|
&dgm.run.cond.from/to.pin.signal.value
|
Lists the pin signal values of the connectors that the wires (free wires or wires belonging to cables) are run to/from.
|
&dgm.run.cond.from/to.pin.<User_Defined>
|
Lists any user-defined parameter that you enter for each pin that conductors are run from or to.
|
&dgm.run.cond.from/to.sheet
|
Lists the sheet number on which the wires (free wires or wires belonging to cables) start or terminate.
|
&dgm.run.cond.name
|
Lists the assigned conductor name for wires (free wires or wires belonging to cables) in a diagram.
|
&dgm.run.cond.User Defined
|
Lists user-defined conductor parameter described in the spool parameter file for wires belonging to cables. Lists user-defined parameter described in the spool parameter file for individual wires.
|
&dgm.run.from/to.conn.name
|
Lists the reference designators of the connector or the name of the rail that cables and free wires are connected from/to.
|
&dgm.run.from/to.conn.<User_Defined>
|
Lists any parameters defined in the connector or rail that you enter manually.
|
&dgm. run. name
|
Lists any wire or cable in the diagram.
|
&dgm.run.param.<User_Defined>
|
Lists any parameter that you enter manually as a user defined parameter for diagram wires or cables.
|
&dgm.run.spool.name
|
Lists the wire and cable spools name parameter run.
|
&dgm.run.spool.<User_Defined>
|
Lists any user defined parameter for wire and cable run.
|
&dgm.spool.name
|
Lists the spool name.
|
&dgm.spool.<User_Defined>
|
Lists any spool parameter that you enter manually as a user defined parameter.
|
&dgm.spool.run.cond.color
|
Lists conductor color parameter for wires in cable and wire spool color for independent wires.
|
&dgm.spool.run.cond.from/to.conn.name
|
Lists the name of each connector or rail that every conductor is run from/to.
|
&dgm.spool.run.cond.from/to.conn.<User_Defined>
|
Lists the specified parameter for each connector or rail that every conductor is run from/to that you enter manually.
|
&dgm.spool.run.cond.from/to.pin.name
|
Lists the pin names that conductors are run from/to for every spool.
|
&dgm.spool.run.cond.from/to.pin.signal.name
|
Lists the pin signal names that conductors are run from/to for every spool.
|
&dgm.spool.run.cond.from/to.pin.<User_Defined>
|
Lists the specified user-defined parameter for each pin that conductors are run from or to for every spool.
|
&dgm.spool.run.cond.from/to.pin_entry_port
|
Lists the entry port of each pin that conductors are run from or to for every spool.
|
&dgm.spool.run.cond.from/to.pin.signal.value
|
Lists the pin signal values that conductors are run from/to for every spool.
|
&dgm.spool.run.cond.from/to.sheet
|
Lists the sheet number on which the wire starts or terminates.
|
&dgm.spool.run.cond.name
|
Lists the name of the wire in the diagram for each spool.
|
&dgm.spool.run.cond.<User_Defined>
|
Lists the wire and cable specified parameters by spool.
|
&dgm.spool.run.from/to.conn.name
|
Lists the connector or rail names that conductors are run from/to by spool.
|
&dgm.spool.run.from/to.conn.<User_Defined>
|
Lists the connectors or rails parameters that conductors are run from.
|
&dgm.spool.run.name
|
Lists the spool names for each wire or cable in the model.
|
&dgm.sym.node.name
|
Lists the name of the given symbol node.
|
&dgm.sym.node.sheet
|
Lists the sheet number on which a given node is located.
|
&dgm.sym.node.<User_Defined>
|
Lists a pin parameter such as signal_name for each connector.
|
&dgm.sym.<User_Defined>
|
Lists a parameter for a component or connector symbol.
|
&dgm.sym.ref_des
|
Lists the reference designator name for a component or connector.
|
&dgm.run.name
|
&dgm.run.spool.name
|
W21
|
Spool32
|
W33
|
Spool18W
|
&dgm.spool.name
|
&dgm.spool.run.name
|
Spool32
|
W21
|
Spool18W
|
W33
|
Spool12
|
View
|
<view name>
|
parent_note
|
<view name>
|
ref_obj
|
<reference designator>
|
routed_from
|
<diagram connection name>
|
routed_to
|
<diagram connection name>
|