What's New Creo 7.0 > What's New: Creo Parametric 7.0 > Detailed Drawings > Auto Erase of Set Datum Planes
Auto Erase of Set Datum Planes
User Interface Location: N/A
Release: Creo Parametric 7.0.4.0
What is the benefit of this enhancement?
The new configuration option auto_erase_set_datum_planes allows you to control whether set datum planes should be automatically erased in newly created drawing views.
• no*—Automatically shows the set datum planes when a drawing view is placed.
• yes—Automatically erases the set datum planes when a drawing view is placed.
This enhancement improves the productivity and reduces the time required to hide set datum planes in new drawing views.
Additional Information
Tips:
Even if you set the configuration option to yes, the set datums are displayed when the Drawing View dialog box is open because you may need to select them as geometry references for the creation of a view. When you click OK, the Drawing View dialog box closes and the set datums are erased.
Limitations:
This configuration option is applicable only when you create a new view in an existing drawing or create a new drawing. It may not work for other workflows, such as replacing a model of a view or adding a new component to the assembly and its impact on the drawing view.
Does this replace existing functionality?
No.
Configuration Option associated with this functionality:
auto_erase_set_datum_planesno*/yes