Improved Support for Intersecting Bodies or Components in Hidden Line Removal (HLR)
It is easier to see intersecting components and bodies in parts and assemblies and in drawing environments.
User Interface Location:
• Click > > to set configuration options.
• Click > >
Release: Creo Parametric 7.0.0.0
What is the benefit of this enhancement?
If you have a part with interfering bodies or an assembly with interfering components, you might want to see the part or assembly correctly in HLR mode. You might also want to see a drawing for a part or assembly with interfering parts or components, correctly in HLR mode. Use the following configuration options:
• hlr_adv_interference_check_prt—Set to yes to accurately remove hidden lines for the intersected bodies in a part. The default is yes.
• hlr_adv_interference_check_asm—Set to yes to accurately remove hidden lines for the intersected bodies and components. The default is no.
Drawings rely on the same configuration options to determine if hidden lines are removed accurately, depending on whether the drawing is a view of a part or an assembly.
To set the accurate removal of hidden lines you can also click, > > and select the Accurate removal of hidden lines in the part mode or Accurate removal of hidden lines in the assembly mode, check box.
 |
 |
Additional Information
|
Tips:
|
Accurately removing hidden lines for intersected bodies or components might slow down performance.
|
|
Limitations:
|
No known limitations.
|
|
Does this replace existing functionality?
|
No.
|
|
Configuration options associated with this functionality:
|
None.
|