To Define Groove Weld Preferences—ANSI
The preferences you define remain active for the current session.
1. Click > 
Welding. The Welding tab opens.
Welding. The Welding tab opens.2. Click 
Preferences. The Weld Preferences dialog box opens.
Preferences. The Weld Preferences dialog box opens.3. In the Weld preference for standard box, select ANSI.
4. Select Groove on the list on left side of the dialog box.
5. Click the Shape tab, and set these preferences:
◦ Select an option from the Type list:
▪ Weld Size. Type or select a value in the weld size box.
▪ Root Penetration. Type or select a value in the root penetration box.
◦ Type or select values in any of the following boxes:
▪ Preparation angle
▪ Preparation depth
▪ Root opening
▪ Face offset
6. Click the Intermittent tab, select the Intermittent check box, and set these preferences:
◦ Select an option from the list to set the method that determines how many welds are created:
▪ Number of welds
▪ Type or select a value for the number of welds.
▪ Select an option to set the weld spacing:
▪ Select Start from center of trajectory to start weld segments from the center of the trajectories.
▪ Select Start from trajectory end to start weld segments from the end of the trajectories.
▪ Type or select a value to set the intermittent weld segment length.
▪ Pitch
▪ Type or select a value for pitch distance (space between two start points of intermittent weld segments).
▪ Type or select a value for intermittent weld segment length.
7. Click the Options tab, and set these preferences:
◦ To set the area of the weld cross section, type or select a value in the Weld cross section box.
◦ Under Weld material, select a predefined weld material, or click Define and create a new material in the Weld Materials dialog box.
◦ Under Weld process, select a predefined weld process, or click Define and create a new process in the Weld Processes dialog box.
◦ To define the visibility of the all-around weld symbol, select an option from the 
All-around weld list:
All-around weld list:▪ No—Do not show the all-around weld symbol in the weld feature symbol, even when the feature detects a closed weld trajectory.
▪ Yes—Show the all-around weld symbol in the weld feature symbol, even when the feature detects an open weld trajectory.
▪ Automatic—Show the all-around weld symbol in the weld feature symbol only when the feature detects that all the weld trajectories are closed.
◦ To define the weld as a field weld, select the 
Field weld check box.
Field weld check box.◦ To define the weld finish, select an option from the Finish list: None, Chipping, Grinding, Hammering, Machining, Rolling, or Unspecified.
◦ To define the weld contour, select an option from the Contour list: None, 
Flat, 
Convex, or 
Concave.
Flat, Convex, or Concave.◦ Select an option from the Back type list:
▪ None
▪ Backing
▪ Select an option from the Backing list. Select 
Remove to use a removable backing strip, or select 
Keep to use a permanent backing strip.
Remove to use a removable backing strip, or select Keep to use a permanent backing strip.▪ Back Weld
▪ Back Size—Select the check box, and then type a value for the size of the back weld.
▪ Select an option from the Back Finish list: None, Chipping, Grinding, Hammering, Machining, Rolling, or Unspecified.
▪ Select an option from the Back Contour list: Flat, Convex, or Concave.
Flat, Convex, or Concave.8. Click the Appearance tab, and set these preferences:
◦ Select a previously defined appearance from the Appearance list.
◦ To set the appearance of lightweight weld trajectories, type or select a value for the curve thickness in the Curve thickness box.
9. Click the Properties tab, and set additional preferences as needed.
10. Click OK.