About General Parameters
The following tables lists the general welding parameters available in Welding. The configuration option pro_unit_length drives the default values.
 |
• The default parameter values are followed by an asterisk (*).
• You must substitute positive user-specific values for any negative default parameter value.
|
Parameters Available—All Welding Standards
|
Parameter Name
|
Value
|
Definition
|
|---|---|---|
|
BACK_TYPE
|
NONE*
BACKING
BACK_WELD
|
Weld back type
|
|
BACKING
|
REMOVABLE_STRIP*
PERMANENT_STRIP
|
Weld back strip option
|
|
DEFAULT_SPOT_DIA
|
value
0.50”/12.70 mm*
|
Default diameter for spot welds
|
|
FACE_OFFSET
|
value
0.000*
|
Face offset for weld
|
|
FEEDRATE
|
value
-1.000*
|
Feed rate of the welding machine’s head across the part (unit = assembly unit/hour)
|
|
FIELD
|
NO*
YES
|
Field weld, the physical location where a weld is created
|
|
GROOVE_ANGLE
|
value
45 degrees*
|
Angle of a groove or butt weld between welded components
|
|
INTERMITTENT
|
NO*
YES
|
Whether weld is intermittent (contains spaces between weld segments)
|
|
LENGTH
|
value
|
(Read-only) Computed length of trajectory of the welding material
|
|
MACH_TYPE
|
MANUAL*
ROBOTIC
|
Machining type of the weld
|
|
MAX_ALLOWED_LENGTH
|
value
1000*
|
Maximum allowed length of the weld
|
|
MAX_ROOT_OPENING
|
value
100*
|
Maximum root opening
|
|
MIN_ALLOWED_LENGTH
|
value
0*
|
Minimum allowed length of the weld
|
|
MIN_ROOT_OPENING
|
value
0*
|
Minimum root opening
|
|
NUM_OF_WELDS
|
value
4.000*
|
Number of intermittent weld segments
|
|
PITCH_DIST
|
value
0.000*
|
Pitch distance between intermittent weld segments
|
|
PLUG_SIZE
|
value
0.000*
|
Depth of the plug weld
|
|
PREP_DEPTH
|
value
0.25”/6.00 mm*
|
The preparation depth of a weld
|
|
ROOT_OPEN
|
value
0.25”/6.00 mm*
|
The size of the root opening between welded components
|
|
ROOT_PENETRATION
|
value
0.25”/6.00 mm*
|
Root penetration depth
|
|
SEG_LENGTH
|
value
0.000*
|
Length of each intermittent weld segment
|
|
SPECIFICATION_NUMBER
|
string
1EXXXXX*
|
Specification number of the weld
|
|
SPOT_DIAMETER
|
value
0.50”/12.70 mm*
|
Spot weld diameter
|
|
SPOT_PITCH
|
value
0.000*
|
The pitch distance between spot welds
|
|
SPOT_STRENGTH
|
value
0.000*
|
Strength of spot weld
|
|
TREATMENT
|
NONE
LOW_HYDROGEN*
PRE_HEATING
POST_HEATING
|
Treatment of the weld
|
|
USER_DEFINED
|
string
|
A user-defined parameter can be added to the list of parameters
|
|
WELD_LENGTH
|
value
|
(Read-only) Computed length of the (physical) weld bead
|
|
WELD_LWW_THICKNESS
|
value
0.000*
|
Curve thickness for a light weld. This parameter is not copied to the weld feature
|
|
WELD_MATERIAL
|
string
|
The filler material used to create a weld. Access the parameter from the weld preferences tools. This parameter is not copied to the weld feature
|
|
WELD_PROCESS
|
string
|
A defined process used to create a weld. This parameter is not copied to the weld feature
|
|
WELD_SIZE
|
value
0.25”/6.00 mm*
|
Size of a weld
|
|
WELD_SPACING
|
AT_CENTER*
AT_END
|
Start point for intermittent weld segments
|
|
X_SECTION_AREA
|
value
-1.000*
|
Cross sectional area of the weld
|
Parameters Available—ANSI
|
Parameter Name
|
Value
|
Definition
|
|---|---|---|
|
BACK_WELD_FINISH
|
NONE*
CHIP
HAMMER
GRIND
MACHINE
ROLL
UNSPECIFIED
|
The weld back finish
|
|
BACK_WELD_SHAPE
|
NONE*
FLAT
CONVEX
CONCAVE
|
The weld back contour
|
|
FINISH
|
None*
CHIP
HAMMER
GRIND
MACHINE
ROLL
UNSPECIFIED
|
Finishing process of the weld
|
|
LEG1
|
value
0.25”/6.00 mm*
|
Value given to the first leg of a fillet weld
|
|
LEG2
|
value
0.25”/6.00 mm*
|
Value given to the second leg of a fillet weld
|
|
SHAPE
|
NONE*
FLAT
CONVEX
CONCAVE
|
The weld contour
|
Parameters Available—ISO
|
Parameter Name
|
Value
|
Definition
|
|---|---|---|
|
BACK_WELD_FINISH
|
NO*
YES
|
The weld back finish
|
|
FINISH
|
NO*
YES
|
Finishing process of the weld
|
|
LEG_LENGTH
|
value
0.25”/6.00 mm*
|
Value given to the first leg of a fillet weld
|
|
SHAPE
|
NONE*
FLAT
CONVEX
CONCAVE
SMOOTH_BLEND
|
The weld contour
|
|
THROAT_THICKNESS
|
value
0.000*
|
Value given to the distance from the weld surface to the trajectory
|